Mast Climber

Lifts 22 000 lb (9,979 kg) at 3′ (0,9 m) / min.

Hydro Mobile

The M Series gas over hydraulics power, ratchet type drive mast climber was the first to be introduced to the market and is still considered North America’s masonry workhorse. With a 7′ wide work deck, lower level plank outriggers, a 16 600 lb payload on 64′ (single) and a 30 000 lb payload on 148′ (twin), this system creates the ultimate condition for your masons and laborers to outperform your competition.

Not only can the M Series handle masonry construction challenges, it brute power and design helps contractors complete industrial jobs where weight capacity and safety is of prime importance.

Climbing Speed: 3’ (0,9 m) / min

Lifts 7 500 lb (3,402 kg) at 7′ (2,1 m) / min.

Hydro Mobile

The P Series gas over hydraulics power, ratchet type drive mast climber is our most versatile and mobile access tool. Using a 3′ wide motor unit and a combination of 3′ or 5′ wide modular bridges, the P Series can pass through narrow openings and be hand assembled in difficult to access areas inside or outside of a building. Despite its smaller size, this unit can still handle a 6 000 lb payload on 28′ (single) and 10 000 lb on 84′ (twin).

Over the last decade, construction trades have discovered the labor savings and job safety benefits of using a small but very powerful P Series mast climber in areas they could not have imagined.

Climbing Speed: up to 7′ (2,1 m) / min

Lifts 12 000 lb (5,443 kg) at 38′ (11,6 m) / min.

Hydro Mobile

The F Series gas over hydraulics power, rack & pinion drive mast climber is specifically designed to handle high rise multi-trade projects. This unit can handle 9 000 lb of material, men and their tools at a continuous speed of 19′ / min (F200) or 38′ / min (F300) in a 50′ wide configuration. The F Series can also be used in twin mode to handle a 15 500 lb payload on 115′.

When coupled with our multiple accessories, This F Series is, by far, the most effective tool for high rise multi-trade jobs on the market today.

Climbing Speed: F200 19’ (5,8 m) / min F300 38’ (11,6 m) / min

Lifts 11 000 lb (4,990 kg) at 30′ (9,1 m) / min.

Hydro Mobile

The S Series is our most recently engineered and perfected mast climbing work platform. With its two 240V, 3 phase electric motors, this rack & pinion drive unit embodies environmental cleanliness, ease of use, simple maintenance and the smoothest ride you can imagine!

The S Series can handle 8 000 lb of material, men and their tools at a continuous speed of 30′ / min in a 50′ (single) configuration. It can also be stretched out to 60′ (single) to handle a payload of 5 800 lb or 120′ (twin) for 13 000 lb. The S Series, when coupled with our multiple accessories is, by far, the most effective tool for high rise multi-trade jobs on the market today.

Climbing Speed: 30′ (9,1 m) / min